Polygonal mould for sheet press

Plastic sheets made with sheet press don't need to be square.

Here we are showing you how to create octagonal mould to create octagonal plastic sheets. The same methods can be applied to create any polygonal mould for the sheetpress (triangle, hexagonal, etc)

You can watch the full video tutorial on precious plastic’s youtube channel here: <a href="https://www.youtube.com/watch?v=WSZq_9a-XMQ&amp;t=81s&quot;&gt;https://www.youtube.com/watch?v=WSZq_9a-XMQ&amp;t=81s&lt;/a&gt;

Don't hesitate to contact us if you have any questions and suggestions for the mould. You can click on our precious plastic profile for the contact information


octagonal sheets.zip


3D Files

Step 1 - Gather tools and material


Sheet press set

Angle grinder

Welding tools and materials


Sander (for product finishing)

Safety gears: welding helmet, safety glasses, mask



Computer with drafting/drawing software


Steel for mold: 2x2cm galvanised steel (standard size =6m)

Clean, sorted plastic with types of your choice

Step 2 - Draw

Draw the polygon in any drafting software of your choice. This will give you precise information on the dimension of the individual parts/side of the polygon. We have included our drawing in the drive link above for reference

Draw the measurement of your sheepress work area

Offset by 5 cm inwards (space needed around the mould)

Draw polygon according to the area capacity of your sheet press machines

Offset by 2 cm inwards (thickness of the galvanise steel)

Get measurement of dimensions of the mould from the drawing you’ve made

this drawing would also be useful later on when you are calculating the amount of plastic you need to make the sheets.

Step 3 - Cut

After drawing and determining the measurements, cut the 20mm hollow galvanized steel according to size with an angle grinder.

Draw the measurement with erasable marker for better precision

Cut with angle grinder

With whiteboard marker, draw out the 1:1 template of your sheets to make sure the angles and dimension line up and adjust accordingly

Step 4 - Weld

With whiteboard marker, draw out the 1:1 template of your sheets to make sure the angles and dimension line up and adjust accordingly.

Weld all the sides to connect the ends together to make your polygonal sheets

Step 5 - Finishing

Grind the excess welding materials with angle grinder

This step is crucial to make sure that the mould is completely flat against the sheets. Otherwise you will damage the steel plate and the plastic will bleed outside of the mould because it is thicker than it should be.

Step 6 - Make your polygonal sheet

It's time to make your polygonal sheet.

Use the area of your polygon (from the drawing) to determine the amount of plastic needed to make the sheet

See precious plastic sheet press "how to" for a step by step tutorial of making a sheet: https://youtu.be/TNG2f_hKc_A

Visit our profile and let us know if you have tried this :slight_smile:


Wedoo Team

Added mould, oa-import, sheetpress